cousin trestec
DYNEESTAR 605 — High-performance HMPE halyard for coastal sailing Ø 8 mm
DYNEESTAR 605 — High-performance HMPE halyard for coastal sailing Ø 8 mm
1 quantity corresponds to 1 metre.
Example: quantity 12 = 12 metres delivered in one continuous length.
Allow approximately 1 to 1.5 times the boat length for each mooring line
📏 Quelle longueur commander
Jib sheet:
approximately 1.5 to 2 times the boat length
Halyard:
approximately twice the mast height, plus the distance to the cockpit.
Allow an additional 1 to 2 m.
Mainsheet:
depending on the tackle system installed
Approximate guidelines. If possible, check the length of the previous rope or the manufacturer’s recommendations.
Couldn't load pickup availability
Delivery information – August
In-stock products are shipped normally. For items that are being restocked, shipping will gradually resume in September due to the supplier's annual shutdown.
The DYNEESTAR 605 Ø 8 mm is an HMPE (Dyneema) halyard with a moiré braid and high-performance core, designed for halyards on coastal sailboats 6 to 10 meters long that demand the best.
Lightweight, virtually inextensible, and exceptionally strong for its diameter, it transforms maneuverability: every inch of spinnaker drop or reefing translates immediately to the sail. For racers and coastal sailors who don't compromise on performance.
Sold by the meter, cut to the exact length requested.
Key Features
- HMPE (Dyneema) core — maximum strength, near-zero stretch
- Moiré braid — flexible sheath, soft to the touch, and wear-resistant
- Extreme lightness — 43 g/m for 3,700 daN breaking strength
- Immediate responsiveness — every action translates without delay to the sail
- Compact diameter — Ø 8 mm for high-level performance
- Sold by the meter, no minimum order
Recommended Uses
- Mainsail halyard for coastal sailboats (6–10 m)
- Spinnaker and genoa halyard
- Racing maneuvers
- High-performance sheet
Technical Specifications
| Characteristic | Value |
|---|---|
| Cousin Reference | 605 |
| Diameter | 8 mm |
| Material | HMPE — Dyneema |
| Construction | Moiré braid, HMPE core |
| Breaking strength | 3,700 daN |
| Weight | 43 g/m |
| Stretch | Near-zero |
| Buoyancy | No |
| Sale | By the meter |
Custom Cutting
The quantity ordered corresponds to the number of meters desired. The rope is delivered in a single continuous length, unless otherwise specified.
Examples:
- Quantity 5 → 5 meters
- Quantity 12 → 12 meters in one piece
- Quantity 25 → 25 meters
Shipping
Cut to order, fast shipping from France
Cousin Trestec product, French manufacturing
Outfitting a cruising sailboat?
For halyards on cruising sailboats 10–14 m, discover the DYNEESTAR 605 Ø 10 mm, offering 4,500 daN breaking strength for the most demanding maneuvers.
Partager
